Sugarless Boost Adapter (konvertiert 142x12mm auf 148x12mm)
Photos: Sugarless Boost Adapter (konvertiert 142x12mm auf 148x12mm)
€16.89
Price incl. VAT and plus shipping costs.
The shipping costs can only be calculated when you are logged in. Log in
Item description: Sugarless Boost Adapter (konvertiert 142x12mm auf 148x12mm)
Boost adapter converts 142x12mm rear hubs to the 148x12mm BOOST standard.
The set includes two 3mm spacers, plus a rotor adapter and 6 pieces of longer Torx bolts
Installation is very simple:
1) Place a 3mm spacer left and right between the hub and rear dropouts, on the thru axle.
2) Place the rotor adapter on the holes of the 6-hole disc mount of the rear hub and tighten the brake disk together with the enclosed Torx screws
3) Optionally, apply a drop of medium-strength threadlocker to the Torx screws in advance to secure them additionally
PS: Bikeinsel assumes no guarantee and liability for any damage etc. to the customer's existing components, installation is therefore at the customer's risk.
Please note this, we only point this out in advance for the sake of completeness, as we are of course unable to test all hub and disk combinations for problems, any major loads during braking, etc. .
However, as we have used these adapters ourselves without any problems so far (they were originally only made for us by a well-known English manufacturer), we don't really see a problem in using them.
The rotor adapter distances the brake rotor a few mm further outwards, i.e. the slightly greater leverage on the longer Torx screws also results in slightly greater leverage on the 6-hole hub mount.
This means that you should either regularly check lightweight hubs whose 6-hole mounting holes only consist of 6 tiny little "nipples" in principle, and at the same time use lightweight rotors that do not have a continuous inner ring on the 6-hole mount, for overloading, or avoid this combination from the outset.
Shipping costs (unfortunately cannot be calculated automatically here, as small items), each in an insured parcel via DPD:
within Austria 4,50 EUR
to Germany for 7.90 EUR
ATTENTION: Price is fixed price, no bids please! The item can also be bought as usual in our webshop officially!
The set includes two 3mm spacers, plus a rotor adapter and 6 pieces of longer Torx bolts
Installation is very simple:
1) Place a 3mm spacer left and right between the hub and rear dropouts, on the thru axle.
2) Place the rotor adapter on the holes of the 6-hole disc mount of the rear hub and tighten the brake disk together with the enclosed Torx screws
3) Optionally, apply a drop of medium-strength threadlocker to the Torx screws in advance to secure them additionally
PS: Bikeinsel assumes no guarantee and liability for any damage etc. to the customer's existing components, installation is therefore at the customer's risk.
Please note this, we only point this out in advance for the sake of completeness, as we are of course unable to test all hub and disk combinations for problems, any major loads during braking, etc. .
However, as we have used these adapters ourselves without any problems so far (they were originally only made for us by a well-known English manufacturer), we don't really see a problem in using them.
The rotor adapter distances the brake rotor a few mm further outwards, i.e. the slightly greater leverage on the longer Torx screws also results in slightly greater leverage on the 6-hole hub mount.
This means that you should either regularly check lightweight hubs whose 6-hole mounting holes only consist of 6 tiny little "nipples" in principle, and at the same time use lightweight rotors that do not have a continuous inner ring on the 6-hole mount, for overloading, or avoid this combination from the outset.
Shipping costs (unfortunately cannot be calculated automatically here, as small items), each in an insured parcel via DPD:
within Austria 4,50 EUR
to Germany for 7.90 EUR
ATTENTION: Price is fixed price, no bids please! The item can also be bought as usual in our webshop officially!
automatically translated

Pflichtangaben nach GPSR
Further information may be contained in the product images.
Buy Sugarless Boost Adapter (konvertiert 142x12mm auf 148x12mm)
€16.89
Price incl. VAT and plus shipping costs.
The shipping costs can only be calculated when you are logged in. Log in
Details & Specifications : Sugarless Boost Adapter (konvertiert 142x12mm auf 148x12mm)
Quantity | 1 |
---|---|
Brand | Sugarless |
Condition | neu |
Country |
Österreich |
Pickup | Yes |
Location | |
Frame Size | Other |
Accepted payment methods | PayPal, Bank transfer |
Views | 424 × |
---|---|
Current viewers | 1 |
Published | Apr 25, 2024 7:32 AM |
Expires | Apr 25, 2025 7:32 AM |