Gates Carbon Drive CDX RIEMENSCHEIBE Hinten 9-SPLINE DISC 6-LOCH Neu
Photos: Gates Carbon Drive CDX RIEMENSCHEIBE Hinten 9-SPLINE DISC 6-LOCH Neu
€29
Price incl. VAT and plus shipping costs.
The shipping costs can only be calculated when you are logged in. Log in
Item description: Gates Carbon Drive CDX RIEMENSCHEIBE Hinten 9-SPLINE DISC 6-LOCH Neu
Pinion
Gates CDX
Sprockets for belt drive
22T
New
CT1122HMN REV E
6-hole
This rear CDX pulley from Gates for trekking and off-road use has a 9-spline mount with nine grooves. This makes it suitable for very short Shimano HG freewheel bodies (e.g. DX). In addition, the disc has six bolt holes, so it is compatible with 6-hole disc brakes.
Specifications:
Range of use:
All Mountain, Touring & Trekking
Teeth:
22 Z
Fastening:
9-Spline
Technical specifications:
Width of teeth:
11 mm
Tooth pitch:
11 mm
Thickness of pulley at mounting:
2.35 mm
Offset:
2.1 mm (mounting surface), 2.25 mm (centerline)
Outer diameter:
75.3 mm
Material:
Stainless steel
Compatibility:
Shimano HG standard freewheel body with nine notches (Shimano MTB, Shimano Road)
Disc 6-hole brake systems
Features:
CDX level: high-end variant for high loads and best performance
suitable for mud, sand, snow and ice and all roads
middle guide groove (CenterTrack)
high mileage
robust stainless steel
narrower receiver than standard version, therefore also suitable for very short freewheels
Technology:
Gates Carbon Drive System
The main advantages of the Gates Carbon Drive belt drive system are cleanliness, smoothness and robustness. Urban commuters as well as mountain bikers, e-bike users or recreational riders benefit from the high mileage. Oil-stained or rusty chains are a thing of the past.
Clean: No lubrication means no accumulation of grease and dirt.
Smooth and silent: metal-to-metal contact of the chains is eliminated.
Lightweight: entire system weighs less than a typical bicycle chain.
No elongation: Belt does not need to be retensioned or replaced
Self-cleaning: CenterTrack and MudPort treads are specifically designed to repel mud, dirt, snow or other contaminants
Consistent efficiency: long drive life, while a chain's efficiency is greatly reduced by wear or contamination.
A custom-made frame is required to install the Gates Carbon Drive belt drive. Modification of a conventional frame is strongly discouraged.
Manufacturer number:
CT1122HMN
Scope of delivery:
1 x Rear Pulley Gates CDX 9-Spline Disc 6-Hole
Price 29.- instead of 119.-
Gates CDX
Sprockets for belt drive
22T
New
CT1122HMN REV E
6-hole
This rear CDX pulley from Gates for trekking and off-road use has a 9-spline mount with nine grooves. This makes it suitable for very short Shimano HG freewheel bodies (e.g. DX). In addition, the disc has six bolt holes, so it is compatible with 6-hole disc brakes.
Specifications:
Range of use:
All Mountain, Touring & Trekking
Teeth:
22 Z
Fastening:
9-Spline
Technical specifications:
Width of teeth:
11 mm
Tooth pitch:
11 mm
Thickness of pulley at mounting:
2.35 mm
Offset:
2.1 mm (mounting surface), 2.25 mm (centerline)
Outer diameter:
75.3 mm
Material:
Stainless steel
Compatibility:
Shimano HG standard freewheel body with nine notches (Shimano MTB, Shimano Road)
Disc 6-hole brake systems
Features:
CDX level: high-end variant for high loads and best performance
suitable for mud, sand, snow and ice and all roads
middle guide groove (CenterTrack)
high mileage
robust stainless steel
narrower receiver than standard version, therefore also suitable for very short freewheels
Technology:
Gates Carbon Drive System
The main advantages of the Gates Carbon Drive belt drive system are cleanliness, smoothness and robustness. Urban commuters as well as mountain bikers, e-bike users or recreational riders benefit from the high mileage. Oil-stained or rusty chains are a thing of the past.
Clean: No lubrication means no accumulation of grease and dirt.
Smooth and silent: metal-to-metal contact of the chains is eliminated.
Lightweight: entire system weighs less than a typical bicycle chain.
No elongation: Belt does not need to be retensioned or replaced
Self-cleaning: CenterTrack and MudPort treads are specifically designed to repel mud, dirt, snow or other contaminants
Consistent efficiency: long drive life, while a chain's efficiency is greatly reduced by wear or contamination.
A custom-made frame is required to install the Gates Carbon Drive belt drive. Modification of a conventional frame is strongly discouraged.
Manufacturer number:
CT1122HMN
Scope of delivery:
1 x Rear Pulley Gates CDX 9-Spline Disc 6-Hole
Price 29.- instead of 119.-
automatically translated

Pflichtangaben nach GPSR
Further information may be contained in the product images.
Buy Gates Carbon Drive CDX RIEMENSCHEIBE Hinten 9-SPLINE DISC 6-LOCH Neu
€29
Price incl. VAT and plus shipping costs.
The shipping costs can only be calculated when you are logged in. Log in
Verkäufer Deusmagnus
5/5
basierend auf 1256 Bewertungen.
Details & Specifications : Gates Carbon Drive CDX RIEMENSCHEIBE Hinten 9-SPLINE DISC 6-LOCH Neu
Quantity | 1 |
---|---|
Brand | Gates Carbon Drive |
Condition | neu |
Country |
Österreich |
Pickup | Yes |
Location | |
Accepted payment methods | Bank transfer |
Views | 350 × |
---|---|
Current viewers | 1 |
Published | Aug 29, 2024 7:51 PM |
Expires | Aug 29, 2025 7:51 PM |