Mavic XM 424 Felge + 15x100 mm Nabe, Vorderrad XC / Gravel 29"

Hello,

for sale here is a light and robust 29" front wheel for MTB XC/marathon or gravel use, which was built by hand from the following components:

Rim: Mavic XM 424 Disc with 24mm rim width, 32 holes, tubeless ready, 29"

Hub: Noname or could come from a Specialized wheel, 15x100mm, good quality anyway, light and well mounted, 32 holes

Spokes: spokes with Sapim D-Light on the more preloaded wheel side (left) and the thinner Sapim Laser spokes on the opposite side

Nipples: Sapim Polyax Alu

The wheel was once built by the wheel builder, the spoke tension was adjusted with the help of a tensiometer and it was pressed down several times.

The wheel was ridden for a while, but has been standing around for a while. The technical condition is top! No dents, of course, and the concentricity and spoke tension are also great. Visually, there are traces of dirt around the holes for the spoke nipples on the rim. I had forgotten to thoroughly remove the excess linseed oil after the build, which is why it has dried on here in combination with dust. If it bothers you, you can scrape it off or try to remove it with solvent...

Private sale
I will gladly answer any questions