Innsbruck - All Items

For sale e*thirteen LG1 DH Race Carbon wheelset in 29". Axle standard: VR 110x20mm, HR 150x12mm The wheels were re-spoked by e*thirteen in October 2024 and have not been used since. Rim tape is already installed. The wheels…

For sale is a 30 tooth chainring from Shimano for Shimano Direct Mount cranks. The chainring works perfectly. The chainring is from the Deore XT M8100 groupset and is therefore especially suitable for the FC-M8100 M8120 M8130…

Adapter for Shimano TL-FC32 tool for mounting and dismounting SM-BBR60 Ultegra 6800 bottom bracket cups as well as BB-MT800 and BB-MT801.

For sale is a pair of Magura Storm HC brake rotors with 6-hole mounting. The set consists of one 203mm and one 180mm brake disk, both brake disks have not yet reached the wear limit. There is still approx. 2mm left of the 2mm…

For sale is a 36 tooth chainring from Garbaruk. The chainring is only compatible with Race Face Cinch systems. The chainring is in good condition as it has been replaced by a smaller one. Application: MTB Material: 7075-T6…

For sale is a Newmen mountain bike freewheel for 2nd generation hubs with ratchet or pulley freewheel. The freewheel is compatible with Shimano Microspline cassettes and is in excellent condition as it has been replaced with…

For sale is a Shimano SLX FC-M7100 crank. The crank is compatible with all Shimano 12s direct mount chainrings. All accessories are included, the crank has the usual signs of use in the sport, but has no major damage that…

For sale is a service kit for a certain series of the Rock Shox Reverb seatpost in unopened condition. Unfortunately, the seatpost including the corresponding bike was stolen, so the service kit is no longer needed.

I have a SRAM GXP bottom bracket to give away. The bottom bracket will be given away as defective, as the bearings run relatively rough, but may still find a use as I find it too bad to dispose of. Bearing shell material:…

For sale is a PressFit bottom bracket from Race Face. The bottom bracket is compatible with 30mm crankshafts and various housing widths. The bearings run softly and smoothly, fully functional. Application: Cross Country,…

For sale is a 34 tooth chainring from Shimano for Shimano Direct Mount cranks. The chainring works perfectly. The chainring is from the Deore XT M8100 groupset and is therefore especially suitable for the FC-M8100 M8120 M8130…

For sale is a pair of Xpedo Baldwin pedals. The pedals have been completely cleaned and re-greased so they work well. With normal use, the pedals should still be usable for some time. With intensive use you would have to…

For sale is a light small air pump of the brand Blackburn with frame mount. The pump has been completely disassembled and serviced and therefore works perfectly and has hardly any signs of wear.

For sale is the Specialized Chisel Comp Woman in size S and the color Satin Gloss Acid Mint/Black. The bike has been ridden very little and is in excellent condition. With the Fox 32 Step Cast fork and the Deore XT groupset,…

Selling a seat post/saddle Pivotal Kombi. It is in good condition but has a few scratches at the bottom of the post which are only of an optical nature. (See pictures) Shipping and pickup possible. If you have any questions,…

Selling an unused Octance One seat post/seat combo due to a bad purchase. The seat post has a diameter of 25.4 m. Pickup and shipping possible. If you have any questions, please ask! :)

I'm selling Deity Megattack grips, as they are a bit too thick for me. The grips have a diameter of 36mm and are incredibly well damped thanks to the soft rubber compound. As the grips were only fitted for 2 days for test…

I'm selling my Specialized P.3 The bike was very rarely ridden (not at all this season), so I would like to pass it on to good hands. The crank and bottom bracket have been freshly replaced, as has the front tire, and are…

For sale is a Raceface Turbine aluminum handlebar. The handlebars have slight signs of clamping, but apart from that hardly any signs of use. The handlebar has a width of 740mm, a clamping of 31.8mm.

For sale is a Raceface Turbine aluminum handlebar. The handlebars have slight signs of clamping, but apart from that hardly any signs of use. The handlebar has a width of 760mm, a clamping of 35mm, 10mm rise, 5° upsweep, 8°…